FC CFS-100ALC is an emulsified water-soluble cutting grinding fluid that can be applied to metal processing of various materials such as aluminum (alloy).

◆Application and use ratio of FC CFS-100ALC
・Cutting of aluminum (alloy) 10 to 30 times
・Grinding of aluminum (alloy) 20 to 50 times

◆Features of FC CFS-100ALC
＊Contains lubricants with rich lubricity, can exert excellent cutting performance.
＊Aluminum has excellent corrosion resistance.
＊Excellent corrosion resistance.

◆Characteristics of FC CFS-100ALC (The following data is only a certain measured value)
・Appearance (original liquid); light yellow to light brown liquid
・Specific gravity (15℃); 0.91
・ PH (×10); 9.0

◆FC CFS-100ALC packaging
18L can
200L barrel

(Note) The characteristics and packaging can be changed as needed.
The change in temperature may cause a slight change in color, but it has no effect on performance.

Precautions
(FC CFS-100ALC)

(1) Use and use limitation
・Do not use for applications other than cutting and grinding agents. Do not use it in general households.

(2) Notes on use
・This product contains amine. Please do not mix with rust inhibitors containing nitrite.
・Entering the eyes can cause inflammation. Wear protective glasses to prevent eyes from entering.
・Skin contact can cause inflammation. Please wear protective gloves to prevent skin contact during use.
・Inhalation of mist or steam can cause discomfort. When using, please use breathing apparatus to prevent inhalation of mist and steam.
・When diluting, please follow the instruction manual.
・ Keep out of the reach of children.
・Do not drink

(3) Emergency treatment
・If you get into your eyes, immediately wash your face with water for at least 15 minutes. In case of inflammation, please contact the doctor and follow the doctor's instructions.
・In case of skin contact, wash with water and soap immediately. Take off contaminated clothing and wash it before reuse. Please contact the doctor if the skin is inflamed and follow the doctor's instructions.
・In case of inhalation of mist and steam, immediately move to a place with fresh air, cover your body with a blanket, keep warm, keep quiet, contact the doctor, and follow the doctor's instructions.
・When drinking, immediately drink plenty of water and spit it out. Contact the doctor and follow the doctor's instructions. Please do not feed and spit out without consciousness.

(4) Disposal in case of leakage
・When leaking, please remove all ignition sources and evacuate. Wear protective equipment, absorb with sand or inactive absorbent materials during the recycling operation, and then throw it into a closed waste container.

(5) Precautions in case of fire
・For surrounding fires, wear protective equipment and use foam, powder, carbon dioxide fire extinguishers, dry sand, etc. to extinguish the fire at the upper air outlet.

(6) Storage method
・To prevent the entry of garbage, moisture, etc., please seal after use.
・Prevent direct sunlight and rain, please keep in a cool place.

(7) Disposal methods
・The original liquid and the used liquid should be entrusted to a professional waste disposal company and handled in compliance with laws and regulations.
・Wash water, adjust pH, agglomerate Shendian treatment, activated sludge treatment, activated carbon adsorption and other treatments, and comply with the government's standard discharge standards.
・Empty containers contain debris. Be careful when handling empty containers.

(8) Other
・Please keep the instruction manual properly until the use of this product is terminated or discarded.
・Please keep the instruction manual in a state where users can always read it.
・When transferring to another container, please keep the user manual in a place where you can read it immediately while revealing the product name and label content.
・Refer to the safety data sheet for details.
・The content of the current record is based on the current materials and information, and may need to be revised due to new knowledge.
・The precautions are for the normal usage method. In the case of special use, please implement the safety measures suitable for the purpose and usage.
・The description content is for information only and does not assume warranty responsibility.